Wednesday, January 25, 2017

For everyone who wants to make a ribbon jointed doll, but doesn't know how - a full and complete tutorial "Making a Ribbon Jointed Doll in Dorote Zaukaite Style" is available on my Etsy:

All processes are explained and illustrated with over 250 photos and schemes and drawings. You will find out how I make those stylish shoes, and those fancy wigs and all other tips and tricks that one has to know while making a doll.

Hurry up - do not miss your chance to purchase your own step by step guide for a Ribbon Jointed Doll, as not so many are left.... JUST KIDDING! ;) - the tutorial is digital, so there is enough for everyone! :)

Wednesday, February 2, 2011

Working with air dry clay – make it most enjoyable possible.

Ok this is not quite a tutorial as here will not be photos (sorry for that, but they are just taking to much time).
How ever I would like to share some tips on working with air dry clays.

1. Armature – this is where you start the doll, and I know you are anxious to start sculpting, how ever you must take your time to make a proper armature. Before even starting you must plan:

a) Will you sculpt the whole complete doll or will you make her partially sculpted with soft body?

b) If you are going to make her partially sculpted – which parts you will sculpt (head with neck and shoulders or just head; arms till elbows or just palms and etc.)

After you have imagined how your doll will will be made, it is time to make an armature. The parts of armature which are going to be covered with clay must be strong and not flexible. It is essential for avoiding possibility of cracks while the air dry clay is getting dry.

2. When armature is ready I usually paint it with PVA glue to make the clay stick better to it.

3. Sanding is something most of us really hate – your nose, eyes and whole room get full of dust, and it seems there will never be end for it, as the surfaces still has hundreds of small scratches which you want to disappear.

There is a way to avoid the biggest part of it. All you need is some water, a tiny brush and a peace of natural fabrics (old piece of bed sheet suits perfectly). Now you make the fabric wet and stroke gently over the surface. The hard to reach parts – like eyes, nose ears and etc can be stroked with a wet painting brush. NOTE this method is best for the chalky clays, it can be used for paper clays too, but the humidity must be very moderate.

After your master piece is dry, you may still need a bit of sanding, but it will be much less than before.

4. Use primer* – it will make the surface harder, less water absorbing and the paint will stick better. I usually use 1 layer of primer, and then I sand the doll with finest sanding sponge, and use the 2nd layer of primer. I let it get dry for a couple of hours and just after that I start painting. Thanks to this, the surface is not absorbing paint to much, and it helps to avoid deep brushstrokes.

*when I say primer, I mean a simple primer used for walls before painting them. You can find it in building supply stores, just ask for the one which is absorbed deeply and doesn’t make film on the surface.

5. Do not throw air dry clay to the bin. You can collect all small peaces of dry clay and the powder which you’ve got while sanding and etc. Just put everything to the bowl, add a bit of water and leave it for the night – you will be able to use it again. If the mass is to liquid – let it dry for a couple of days.

6. The liquefied air dry clay is very useful for correcting small scratches, and for making tiny *fingers.

*make a hand armature, cover it with PVA glue, let it get dry, paint it with liquefied clay for several layers until you will get the thickness you want. You can use hair dryer to make them dry faster.

Good luck with your creative work!

Thursday, July 1, 2010

Making a corset for a doll

I thought I might share some WIP pictures from my Marie Antoinette doll. This is the way I usualy make those tight, terribly uncomfortable but also very beautiful corsets.
Click on the pcture to enlarge ;)

Tuesday, September 22, 2009

Here is one of hundreds ways how to make your very own miniature christmas tree.
You will need some thin wire and some threed for the branches and a wooden stick for the trunk. I was using white threed, but you can choose any colour you like ;)